Welcome Steel

Monel Din 2.4375 Pipe Flanges is a nickel-copper alloy with age hardening properties imparted by alloying additions of aluminium and titanium. Nickel-Copper Alloy K500 Flanges retains the excellent corrosion resistant characteristics of K500 and has enhanced strength and hardness after precipitation hardening when compared with the latter.

Specifications

Monel K500 Flanges Specification :

Specifications : ASTM B564 / ASME SB564

Standards : ASTM, ASME Flanges, ANSI Flanges, DIN Flanges, EN Flanges, BS Flanges etc.

Dimensions : ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings

Size : 1/8″ – 4″

Pressure Ratings :150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64

Grade : Monel K500 (UNS No. N05500)

ASTM B564 Monel K500 Flanges Equivalent Grades

STANDARD WERKSTOFF NR. UNS

Monel K500 2.4375 N05500

ASME SB564 Monel K500 Flanges Chemical Composition

Element C Mn Si Cu Al S Fe Ni

Monel K500 0.25 max 1.5 max 0.5 max 27.0 - 33.0 2.3 - 3.15 0.010 max 05 - 2 63.0 min

ASME SB564 Monel Alloy K500 Flanges Mechanical & Physical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation Hardness (Brinell)

Monel K500 8.44 g/cm3 1350 °C (2460 °F) Psi – 1,60,000 , MPa – 1100 Psi – 1,15,000 , MPa – 790 20 % -

STANDARD	WERKSTOFF NR.	UNS
Monel K500	2.4375	N05500

Element	C	Mn	Si	Cu	Al	S	Fe	Ni
Monel K500	0.25 max	1.5 max	0.5 max	27.0 - 33.0	2.3 - 3.15	0.010 max	05 - 2	63.0 min

Element	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation	Hardness (Brinell)
Monel K500	8.44 g/cm3	1350 °C (2460 °F)	Psi – 1,60,000 , MPa – 1100	Psi – 1,15,000 , MPa – 790	20 %	-